Reviews

BenQ RL2460HT Review: Gaming Monitor with HDMI Output

 

About The Review:

This BenQ RL2460HT gaming monitor was provided by BenQ for review purposes. I will be reviewing the build construction, picture quality, and overall technical performance of the RL2460HT, including input lag performance.

 

Display Details

 

Size: 24″ Native Contrast Ratio: 1000:1
Resolution: 1080p Dynamic Contrast Ratio: 12M:1
Aspect Ratio: 16:9 Panel Type: TN
Response Time: 1ms GTG Viewing Angle: 170/160
Display Colors: 16.7 Million Color Gamut: 72%

 

Inputs, Audio, and MSRP

 

Inputs/Outputs: 3 HDMI (2x Input, 1x Output) DVI VGA
Speakers & MSRP: Stereo Speakers $249

 

BenQ RL2460HT Amazon
 

 

  • The BenQ RL2460HT, At A Glance:

The RL2460HT features a new base that takes up less room than the RL2455HM.

The RL2460HT features a new base that takes up less room than the RL2455HM.

 

[dropcap]P[/dropcap]reviously, BenQ manufactured the RL2455HM gaming monitor to serve the needs of console gamers that required a low-lag display for gaming. Featuring a 24-inch display and a couple of HDMI inputs, the monitor offered an excellent OSD and feature-set at an affordable price. The RL2460HT continues this trend, with some very interesting additions that deserve attention. The chief feature offered on this new monitor is the inclusion of a third HDMI port, which specifically functions as an HDMI output. The port allows you to output any signal that is being fed into the monitor through the traditional HDMI inputs, with the monitor duplicating the image to another display of your choosing. There are some great reasons to utilize this function:

 

[list style=”check”] [li]You can use the HDMI out to prevent latency that can occur from equipping an external device. For example, a capture card that normally comes in between your game console and the monitor, is now placed after the pure signal is received by the primary gaming monitor (the RL2460HT, in this instance).[/li]

 

[li]Create head-to-head setups for multiplayer games that use one screen. The most obvious choice would be fighting games, as the HDMI out sends a duplicate signal to another display of your choosing. This allows recreation of an arcade-style setup without investing in a separate HDMI splitter, that may cause latency.[/li]

 

[li]Mirror a source to a larger display for demonstration. If you have a large projector or HDTV that you want to use to display the RL2460HT’s input, the HDMI out will allow you to send the signal without causing latency to users on the RL2460HT.[/li] [/list]

 

For those that may have missed it, I managed to get my hands on this monitor at CES 2014 in January, and reported my impressions on it. The final production version of this monitor is launching next month in April, so read on to see what it offers.

 

The RL2460HT features a plethora of inputs, including an HDMI out port.

The RL2460HT features a plethora of inputs, including an HDMI out port.

 

The RL2460HT features a complete assortment of modern inputs, including DVI, D-Sub, double HDMI inputs, and one HDMI output. In terms of audio connectivity, line-in and headphone jacks are also present to serve analog audio. The placement of the ports remain identical to the RL2455HM, with the exception of the added HDMI output. You shouldn’t need to invest in additional equipment, unless you’re planning to hook up an older analog connection (such as component) to this monitor.

The largest aesthetic improvement on the RL2460HT is its completely redesigned stand. The RL2455HM used a rectangular base that attached to the monitor via a glossy piece of plastic. This has been completely removed in favor of a circular base that occupies less room, attaching to an extremely solid adjustable stand, that comes pre-installed on the monitor out of the box. It has significant weight, and it is very unlikely that you will experience any kind of wobble on the RL2460HT. The monitor’s height can be adjusted leisurely, and can also be placed into portrait mode for gamers that love old school shooters (Ikaruga comes to mind). Tilting functionality is available to fine-tune monitor placement.

 

The RL2460HT features a plethora of inputs, including an HDMI out port.

The stand on the RL2460HT is impressively built. It features full height adjustment, tilt, and portrait functionality.

 

  • Panel Specs:

On the panel side of things, the RL2460HT is extremely similar to the RL2455HM. It uses a 24-inch matte TN panel with an LED backlight, and features the same 1ms GTG response time (when enabling AMA). It has a native resolution of 1080p (1920 x 1080 pixels), which also services 720p due to its 16:9 aspect ratio. Dynamic contrast ratio is measured to be 12M:1 (million), with a 1000:1 native contrast ratio. The refresh rate is pegged at 60hz, which is enough for all console gamers, but may prove lacking to serious PC gamers that demand more frames. If this is the case, you should look into BenQ’s other offerings, such as the XL2720Z. Very little has changed from the RL2455HM in terms of panel specifications.

 

  • Buttons:

Button layout also remains identical to the RL2455HM, offering a host of side buttons that launch an OSD when pressed. The buttons retain the same matte finish and feel of the monitor’s bezel, and require deliberate force to activate. I’m personally a big fan of the way BenQ handles their button control, as it doesn’t require me to guess which button I’m pressing when in the dark. Simply press any button to bring up the OSD, which lines up perfectly with the buttons on the sides. This also allows you to change the functions of three buttons through the OSD, as they are not tethered to a specific function inherently.

 

  • Menu Items and Features (OSD)

BenQ offer the standard assortment of configuration that is present in most of their gaming monitors, including Smart Scaling, Black eQualizer, AMA (Advanced Motion Accelerator), as well as common controls such as brightness, contrast, and various color optimization settings. One new inclusion to their OSD is a setting called Low Blue Light, which controls the amount of blue that is outputted on the screen. BenQ offers blue configuration in order to reduce eye fatigue, as the abundance of blue can harm your eyes over time. This may be a useful feature for those that spend long hours using the monitor, however it will affect color calibration, so use it accordingly.

 

 

  • Viewing Angles

As mentioned earlier, the RL2460HT uses a TN panel, which isn’t going to sport the best viewing angles by nature. Move your head around and you will notice gamma shifts and/or darkening of the screen depending on height. Like the RL2455HM, the viewing angles are measured at 170°/160°. However, in application, the RL2460HT has the edge over the RL2455HM due to its robust stand. You can freely adjust the height and tilt of the display, allowing you to nail the sweet spot necessary for a TN panel. Having a high quality, adjustable stand is very important for TN displays, and can help combat some of the shortcomings inherent to TN panels.

 

  • Black, White, and Color Output:

The RL2460HT features several picture modes, including Standard, Movie, Photo, sRGB, Eco, RTS 1, RTS 2, Fighting, FPS, and three Gamer profiles to customize to your liking. The latest addition to the picture presets is the inclusion of the Fighting preset, which boosts the amount of blue that’s present on the screen. BenQ created this preset to help aid fighting game players confirm the presence of blue (which usually occurs when an attack is blocked in a game like Super Street Fighter IV). Personally, I disliked using this picture preset as it drastically affects the other colors that are present, and noticeably changes how colors are supposed to appear. It also seems counter-productive, as blue is a very strong color by nature, which would be easier to confirm if the screen wasn’t saturated with it. Under fighting game mode, the grayscale ends up receiving a severe green tint, so overall I recommend avoiding it if you’re looking for a balanced picture.

Like the RL2455HM, you have access to dynamic contrast, saturation, sharpness, as well as individual RGB settings to tailor the image to your liking. Out of the box, the picture modes with the best balance of color are the Standard and sRGB presets. If you plan to calibrate this monitor, you will have to avoid sRGB as it locks several picture adjustment options. The other picture modes are either too red, too blue, or have skewed gamma in general.

Using the test patterns from Lagom under sRGB mode, I was able to resolve the majority of dark squares except 1 and 2 under the black level test, and all of the white squares up to 253 on the white level test. The contrast setting used for this was the default 50. Keep in mind that placement will drastically affect the appearance of the screen and colors, due to TN’s poor viewing angles. Luckily, the stand should allow you to seat the monitor at optimum eye level.

 

BenQ RL2460HT AMA set to high.

The BenQ RL2460HT’s fighting mode can appear too blue for some users.

 

  • Scaling:

Scaling options are present in the RL2460HT, allowing you to simulate a variety of aspect ratios and resolutions. Besides the standard Full, Aspect, and 1:1 settings, you can simulate various 4:3 and 16:9 aspect ratios, starting from 17-inch all the way to 23-inches in size. This can be useful for some gamers that may need to train for an event that uses a different monitor size than the RL2460HT. However, using the scaling modes disables the AMA function, which will noticeably increase motion blur. I recommend sticking to the panel’s native resolution whenever possible.

 

  • Measured Input Lag (HDMI Inputs):

The RL2455HM did an excellent job when it came to gaming performance with low input lag numbers, and I’m happy to confirm that the RL2460HT continues this trend. Using our dedicated lag tester, I tested every picture mode available on the RL2460HT to see if there were any differences among them. Thankfully, every picture mode returned identical input lag readings, so you can freely use any picture mode without worrying about additional lag. The measured results were as follows (under sRGB mode with AMA set to high):

[list style=”minus”] [li]Top: 2.6ms[/li] [li]Middle: 10.2ms[/li] [li]Bottom: 17.2ms[/li] [/list]

Averaging out the measurements results in an average input lag rating of 10ms. This falls in line with the fastest monitors in our input lag database, offering identical performance to top gaming monitors such as the BenQ RL2455HM and ASUS VH236H.

 

The RL2460HT features a new base that takes up less room than the RL2455HM.

The input lag on the RL2460HT is minimal, and can be used for serious gaming applications. The HDMI out features no additional latency either.

 

  • Measured Input Lag (HDMI Output):

The RL2460HT offers an HDMI out port in order to serve as an HDMI splitter, duplicating the source input to another screen of your choosing. The point of these feature is to bypass latency that may occur by using external equipment to do the job, by having a separate HDMI connection. For fighting game fans, this is a very useful feature if you would like to set up a head-to-head style experience by utilizing a secondary monitor. The HDMI out will duplicate either HDMI 1 or HDMI 2 inputs, depending on which source is active on the RL2460HT. Great news, after routing our lag tester through the RL2460HT, I can confirm that the HDMI out does not add any additional latency to the secondary monitor either! Using the RL2455HM as the secondary display with the tester connected through the RL2460HT, I measured identical results as if the tester was connected to the RL2455HM directly. This feature is also beneficial for those that like to capture gameplay using an external device, as you can feed the duplicated HDMI signal to your capture device, without worrying about causing latency by connecting the device before the primary monitor.

 

  • Gaming Performance:

Using my copy of Super Street Fighter IV: Arcade Edition 2012, I tested the RL2460HT to see if the numbers held up to their claim. As expected, I couldn’t feel any additional latency over other top gaming monitors, such as the RL2455HM. All of my commands registered properly, without additional input lag. Setting the Xbox 360 to 720p made no difference either, resulting in identical performance, which is good news for PS3 users that are forced to use 720p in several fighting games. I also managed to test the RL2455HM while using the signal from the RL2460HT’s HDMI out port, and as the numbers suggest, there was absolutely no delay using the RL2455HM either, even with a 720p connection. BenQ did an excellent job with the HDMI out, and I highly recommend considering this monitor if you’re planning to use it for reasons mentioned earlier.

 

The RL2460HT features a new base that takes up less room than the RL2455HM.

As the input lag ratings show, the RL2460HT felt extremely responsive with no noticeable input lag during Super Street Fighter IV.

 

  • Motion Blur:

With an advertised 1ms GTG response time, I was expecting the RL2460HT to offer identical motion performance to the previous RL2455HM. Unfortunately, this is both good and bad. Using Blur Buster’s motion testing site, Test UFO, I did a marquee scrolling test while setting the RL2460HT’s AMA setting to off, high, and premium. The results are shown below:

 

BenQ RL2460HT AMA set to off.

BenQ RL2460HT AMA set to off.

 

BenQ RL2460HT AMA set to high.

BenQ RL2460HT AMA set to high.

 

BenQ RL2460HT AMA set to premium.

BenQ RL2460HT AMA set to premium.

 

Like the RL2455HM, setting the AMA to off results in an increase in motion blur, and premium results in a noticeable glow. I found that using the default high setting is the best in terms of performance, as it noticeably cuts down motion blur and prevents a strong glow with fast moving objects.

 

BenQ RL2460HT Amazon

 

About the author

Adeel Soomro

Adeel Soomro

Adeel Soomro, also known as "Four Wude", has been a competitive Street Fighter 4 player since 2008. Using his extensive gaming experience on a casual and professional level, he aims to spread the awareness of input lag existing in today's displays. Having tested over 300 displays for input lag, he hopes that DisplayLag will aid gamers around the world when purchasing the best HDTV or monitor for gaming.

37 Comments

  • how is this monitor compare to RL2455HM? Please tell, I just got RL2455HM, should I return it and get this monitor??

    • I’m a bit of a noob to all this, but i’ve seen similar models on amazon of
      GL2450HM (which seems quite highly rated and popular)
      and also GL2450HT. What are the differences? Is the GL one the previous version of it, and is the performance similar?

      • It seems as if the main difference is the stand. The HT features a fully adjustable stand, that also allows the monitor to be placed into portrait mode.

        • Thanks! Display lag has helped a lot in understanding what are the best monitors. It would be great if there were more comparisons and guides to monitor buying. I’ve narrowed my selections down to 4, and it’s essentially picking between IPS vs no IPS and BenQ vs ASUS. In the UK, our shops suck, so I do not know of anywhere I can actually see the monitors first hand.
          RL2455HM, VX238H, VN247H and VX239H all seem great, it’s just hard picking between them.

          • I’ll see what I can do about creating more guides. I understand that it’s getting tough to choose the perfect display, even after you have all of the information. Glad to be of service!

    • Yes it would, but it depends on what you’re used to. You won’t notice any lag either way, but if you have a beefy computer, I recommend taking a look at 120hz/144hz monitors. The increase in frame rate is very worth it, if your hardware can do it.

  • hi,i have been struggling lately to buy a monitor for my ps4.I only play fps ,and i was wondering should i go with this one or the asus mx279h.i know tn panel are better for fps ,but mx279h has better picture.please please help me to choose one

    • If I had to choose between those two, I would settle with the MX279H personally. The RL2460HT handles motion a little better, but the MX279H features better colors and a larger size.

  • Is there any chance a new and improved version of these monitors will be released in the near furure? I want a new monitor for Xbox One gaming, but I am worried that this RL2460HT Benq series will be outdated soon.

    • CES is happening in a few weeks, so there will definitely be some new monitors announced. I don’t know if they will feature a HDMI-out though.

  • I currently use the ASUS VH236H for console gaming. Does the RL2460HT offer any performance improvements over the VH236H? Less ghosting, blur, for example. Better PQ. I do like the slightly increased size and adjustable stand of the RL2460HT, but would find it a little hard to justify the purchase for those reasons alone.

    • I definitely feel like motion and picture quality on the BenQ RL monitors are superior to the VH236H, when you engage the AMA function. If you can grab a good deal on a refurbished RL2460HT, I’d definitely recommend it. At the end of the day, it’s still a TN panel, so the same shortcomings will be present. Whenever I’m at tournaments, I definitely enjoy competing on the BenQ RL2455HM/RL2460HT over the VH236H/VH238H.

    • Unfortunately, I didn’t have the appropriate hardware at the time of this review to conduct proper picture calibration. If I can come across this monitor again, I will be sure to test it and post my settings. I no longer possess this review unit. Sorry!

  • Hi,
    Thanks for the review, this website is amazing. I’ve read so many reviews. I think I’m gonna buy this one. I was looking for a 2455HM like but with a better stand !
    Would you share some good settings or factory settings are ok?
    Thanks for helping.

  • Personally, what do you think is the best gaming monitor for under 200$?

    Also I’m trying to decide between the Asus VX238H vs ASUS MX239H.
    The thing that worries me about TN panels is that when I play 2 player on a game, I think the viewing angle might get botched for the both of us. If you had to pick from either of the two, which one would you pick?

  • I was needing Experian Sample Credit Report earlier today and was made aware of an online platform that has a searchable forms database . If you are requiring Experian Sample Credit Report as well , here’s a https://goo.gl/qwTDhC

  • so if I’m playing call of duty what mode do I want the monitor on for best performance? FPS, standard or the gamer modes? I play on Xbox one

    • All of them have nearly identical input lag values. I’d recommend using the calibrated settings in this article, otherwise anything that looks good to your eye works!

  • Is this monitor a wise choice now? I am planning to buy a QHD monitor and this is the cheapest QHD available in our country. My usage – Lot of movies, normal gaming, and lot of reading .

Leave a Reply to Will Feng X